GoldenEar Technology ForceField, Руководство пользователя

Страница: 8 / 32

Subwoofer Connection
We recommend the use of high-quality cables and connectors when hooking up your subwoofer
(see your dealer).
INPUT CONFIGURATIONS
Left/LFE Input (Line-Level RCA) – Allows connection from the Sub/LFE Output of an A/V receiver, processor or
other suit able low-passed, low-level source.
Left and Right Inputs (Line-Level RCA) – Allows connection from the Left/Right preamp outputs of your receiver
or processor, or integrated amplifier, for use in a stereo (rather than home theater) system.
CONTROLS
Your GoldenEar ForceField Series Subwoofer is equipped with operating controls on the back panel to ensure
excellent flexibility and maximum performance in any installation. Most of them are the “set and forget” type,
although you may occasionally find certain controls require minor adjustments.
Subwoofer Level – This is a volume control, use it to balance the subwoofer output level to best blend with your
other speakers. For suggestions on setting the Subwoofer Controls once your subwoofer has been connected
refer to the section on “Fine Tuning” on page 12.
Lowpass Crossover – Controls the subwoofer’s upper-frequency cut-off. This control (low-pass filter) is continuously
variable between 40 and 150 Hz. This low pass filter control is used to obtain the optimum transition between the
subwoofer and your main speakers when the subwoofer is connected using the Left/Right Inputs and the input
switch is selected for Left/Right input use (see diagram below).
NOTE: The ForceField’s Lowpass Crossover (low-pass filter) is bypassed altogether when the Left/LFE Input is used and
the Input Switch is set to the down position (LFE in). The Sub Out/LFE Out of A/V receivers, processors or subwoofer
control units have their own low-pass filter built into the circuit as part of their bass management setup.
We receive many questions from subwoofer owners asking us where to set the Lowpass Crossover in a variety of
different setups. Although many people think that there is a specific frequency at which to set the controls in their
system, this can only be determined by you. Experimentation is recommended (due to system placement and sub-
jective variables) to obtain the best sound for you. See the “Fine Tuning” section on page 12 for some suggestions.
8
ForceField Owner’s Manual
GoldenEar ForceField Manual
ForceFieldManual_ENG_FRENCH_11_06_21.indd 8 ForceFieldManual_ENG_FRENCH_11_06_21.indd 8 11/6/21 3:32 PM 11/6/21 3:32 PM