manualshive.com logo in svg
background image

S P E C I F I C A T I O N S

Occasional refinements may be made to existing products without notice, 
but will always meet or exceed original specifications unless otherwise 
stated.

* Trademarks of Dolby Laboratories.

DTS is a registered trademark of Digital Theater Systems, Inc.

PB10

PB12

Amplifier 

Power (RMS):

150 Watts

250 Watts

Driver:

10" Pure-Cellulose Fiber

12" Pure-Cellulose Fiber

Inputs:

Line Level (switchable to LFE) 

Line Level (switchable to LFE) 

and Speaker Level with

and Speaker Level with

gold-plated 5-way binding posts

gold-plated 5-way binding posts

Outputs:

Speaker Level, High-Pass with

Speaker Level, High-Pass with

gold-plated 5-way binding posts

gold-plated 5-way binding posts

Low-Pass 

Frequency:

Continuously variable 

Continuously variable

from 50Hz – 150Hz

from 50Hz – 150Hz

High-Pass 

Frequency:

150Hz when using 

150Hz when using 

speaker-level output

speaker-level outputs

Frequency

Response:

27Hz – low-pass 

25Hz – low-pass 

crossover setting

crossover setting

Dimensions

(H x W x D):

14" (16" with feet) x 14" x 15"

15-1/2" (17-1/2" with feet) x 15" x 16"

356mm (406mm with feet) x 

394mm (445mm with feet) x 

356mm x 381mm

381mm x 406mm

Weight:

35 lb/15.9kg

40 lb/18.2kg

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

800-336-4JBL (4525) (USA only)  

www.jbl.com 

© 2001 JBL, Incorporated. JBL is a registered trademark 
of JBL, Incorporated.

Part No. 338129-001

D E S I G N   G O A L :

Bring the thrill of live performance and movie sound to

the home environment by calling on JBL’s professional engineering leadership.

W O O F E R   T Y P E :

Pure cellulose fiber

P O R T   D E S I G N :

FreeFlow™ flared

P R O F E S S I O N A L   R E F E R E N C E :

Cinema Loudspeaker Series

O W N E R ’ S   G U I D E

P R O   S O U N D  
C O M E S   H O M E

P R O D U C T L I N E :  

PowerBass

Series

M O D E L

PB10, PB12

N U M B E R :

Содержание PowerBass PB10









Отзывы: