Golden Compass HD GP620 CC Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 39

background image

5

*Some accessories require a mounting bracket or mounting clips. Please check with your
provider to find out if the accessory you would like to order requires a mounting bracket
or mounting clips.

Safety Guidelines

The symbols below are used in the owner's manual and/or on the product to identify

warnings and to notify you of important safety information. Make sure you read and
understand them completely.

WARNING!

Indicate(s) a hazardous situation which, if not avoided, could

result in death or serious injury. This icon is represented as a black symbol on
a yellow triangle with a black border.

MANDATORY!

Failure to perform mandatory actions can cause personal

injury and/or equipment damage. This icon is represented as a white symbol
on a blue dot with a white border.

PROHIBITED!

Indicate(s) an action(s) that should not be performed under any

circumstance. Failure to adhere can cause personal injury and/or equipment

damage. This icon is represented as a black symbol with a red circle and red
slash.

Safety Symbols

The symbols below identify warnings, mandatory actions, and prohibited actions. They
can be found in the owner’s manual and/or on the product. Make sure you understand
all safety labels before operating the product. Do not remove safety labels from the

product.

Read and follow the Explosive conditions exist!

Indoor use only!

         owner’s manual!

           Use  only  AGM  or
              Gel-Cell batteries!                          Avoid transmitters!                            Hot surface!


         Pinch/Crush Hazard!                Do not place into trash!                      Electrical hazard!


            Corrosive chemicals                    Recycle                        Do not use personal
             inside battery!                                                                                    electronic devices!

INTRODUCTION

ACCESSORIES for the Compass HD POWER CHAIR:

A variety of accessories are available for your Golden Compass HD power chair. Please
contact your Authorized Golden Technologies Provider for more information or to order.

• Cane Holder Tube
• Oxygen Tank Holder
• Cup Holder
• Quad Cane Holder
• Rear Basket

• Walker Holder
• Crutch Holder
• Safety Flag
• Power Chair Cover
• Deluxe Pack N’ Go

• Swing-Away Joystick Bracket
(Optional)
• Swing-Away Footrests
(Optional)
• Stump Support (Optional)
• Elevating Leg Rests (Optional)

«
...
4
5
6
7
8
...
»

Содержание Compass HD GP620 CC








































Отзывы:

Нет отзывов

Похожие инструкции для Compass HD GP620 CC

Бренд: Invacare Страницы: 3

Ki Mobility Catalyst 5

Бренд: ALLIED MEDICAL Страницы: 11

Бренд: AUSnew Страницы: 4

Rigid Aero Z Series

Бренд: TiLite Страницы: 102

Бренд: Roma Medical Страницы: 27

Бренд: panthera Страницы: 2

Бренд: NRS Healthcare Страницы: 12

Бренд: BCP Страницы: 4

Бренд: Shoprider Страницы: 2

R-Net BLUETOOTH

Бренд: Sunrise Medical Страницы: 3

Бренд: AAT Страницы: 40

Бренд: Handicare Страницы: 13

Бренд: Unicare Health Страницы: 36

Бренд: Raz Rehab Страницы: 13

Бренд: Quickie Страницы: 2

Бренд: Mobiclinic Страницы: 7

Бренд: Lumex Страницы: 24

UniLink Elbow Arm Pad Stop

Бренд: Stealth Products Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды