manualshive.com logo in svg

Golden Compass HD GP620 CC, Руководство пользователя

Поделиться
Скачать
Golden Compass HD GP620 CC Скачать руководство пользователя страница 11

10 

 

EMI/RFI 

 

The rapid development of electronics, especially in the area of communications, has    
saturated our environment with electromagnetic (radio) waves that are emitted by        

television transmitters, cellular phones, citizen’s band radios (CBs), amateur radios (ham 
radios), wireless computer links, microwave transmitters, paging transmitters, etc.  
These electromagnetic (EM) waves are invisible and increase in strength the closer one 
gets to the source of transmission.  When these energy waves act upon electrical devices 

and cause them to malfunction or to function in an erratic or uncontrolled manner, they 
are referred to as 

Electromagnetic Interference 

(EMI) or 

Radio Frequency Interference 

(RFI). 

 

EMI/RFI AND YOUR 

Compass HD

™   

All electrically powered vehicles, including power chairs are susceptible to EMI/RFI.  This 

interference could result in abnormal, unintended movement of a power wheelchair. 

 

Unintended  movement  or  brake  release  could  cause  an           

accident or injury. 

 
The FDA has determined that each make and model of power chair can resist EMI/RFI to 
a certain level.  The higher the level of immunity, the greater the degree of protection 

from EMI/RFI measured in volts per meter (V/m).  The FDA has also determined that 
current technology is capable of providing 20 V/m of immunity to EMI/RFI, which would 
provide useful protection against common sources of interference. This product has been 
tested and has passed an immunity level of 20 V/m. 
 

EMI/RFI RECOMMENDATIONS 
                                                                                                             

 

                        

PROHIBITED! 

Do not turn on or use hand-held personal electronic   

                        communication devices such as cellular phones, walkie-talkies, and CB  

                        radios while your power chair is turned on. 



Be aware of any nearby transmitters (radio, television, microwave, etc.) on your   

    intended route and avoid operating your chair close to any of those transmitters.  



Turn off the power if your 

Compass HD

™ is going to be in a stationary position for  

    any length of time. 



Be aware that adding accessories or components or modifying your power chair may  

    make it more susceptible to EMI/RFI. 



If unintended movement or brake release occurs, turn your power chair off as soon  

    as it is safe to do so. 



Report all incidents of unintended movement or brake failure to your Golden 

    representative or to Golden Technologies, Inc. at (800) 624-6374.  

 

Turn off your power chair as soon as it is safely possible if   

unintended or uncontrollable motion occurs or if unintended brake release occurs. 

Содержание Compass HD GP620 CC








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды