manualshive.com logo in svg

Golden Compass HD GP620 CC, Руководство пользователя, Страница: 22 / 39

Поделиться
Скачать
Golden Compass HD GP620 CC Скачать руководство пользователя страница 22

21 

 

COMFORT SETTINGS 

 

EXTENDING THE FOOTREST 

Refer to the pictures below. 
1. Insert a 5mm Allen wrench from the top side into the (2) adjustment screws. 

2. Place a 10mm wrench on the backside onto the (2) nuts and loosen the (2) footrest   
    adjustment screws. 
3. Slide the footrest plate to the desired position and tighten the adjustment screws. 
 

NOTE: 

The maximum extended length is not at the end of the slots. 

 
 
 
 

 
 
 

 

             

 

     

                              

 

 
 

ARMREST ANGLE ADJUSTMENT

  

Refer to the picture below. 
1. Lift armrest up.  
2. Turn jam nut counter-clockwise to loosen.  
3. Turn the adjustment bolt using a 6mm Allen wrench to raise or lower the  
    armrest-angle. Turning the bolt counter-clockwise will raise the angle. Turning the   
    bolt clockwise will lower the angle. Turn until desired angle is reached. 
4. Re-tighten jam nut by turning clockwise. 
5. Repeat steps 1-4 on the other armrest.                                     

Bottom View

 

Top View

 

Jam Nut 

Adjustment Bolt 

(6mm Allen) 

Footrest  

Adjustment 

Nuts (10mm) 

Footrest  

Adjustment 

Screws (5mm) 

Содержание Compass HD GP620 CC








































Отзывы:

Нет отзывов