Golden Compass HD GP620 CC, Руководство пользователя

Страница: 33 / 39

32
CARE AND MAINTENANCE
ROUTINE MAINTENANCE
Your power chair requires a minimal amount of care and maintenance. If you do not feel
confident in your ability to perform the maintenance listed below, you can schedule an
inspection and maintenance with your provider.

Make sure your batteries are fully charged daily. See “Battery Charging”.

While turned off, check the joystick control daily for damage, and make sure it returns
to the neutral position. If any defects are observed, contact your provider. Do not
attempt to repair it yourself!

Inspect the seating system, armrests, footplate, and front riggings daily for loose
hardware, excessive wear, or damage. If any defects are observed, contact your
provider.

Regularly inspect your power chair’s tires for signs of wear.

Regularly inspect all exposed harnessing and connections for wear, damage, and
corrosion. Have your provider repair or replace any damaged harness or connector.
 Keep all the electrical components (charger, joystick control, and electronics) free from
moisture. If any of these items do become exposed to moisture, let them dry
thoroughly before attempting to operate your power chair again.

Periodically check all fasteners for tightness, wear, and corrosion. If any of these are
present, turn off the power chair and contact your provider.
Be careful of pinch points and sharp metal parts (wear gloves).
 All wheel bearings are permanently lubricated and sealed. No additional lubrication is
required.
We recommend that you check the following:
Tire Tread: Regularly visually inspect the tire tread. If the remaining tread is less
than 1/32 of an inch, have your local Golden representative replace the worn tires.
Joystick and Controller: Protect the joystick and controller from adverse weather
conditions. Moisture will damage the controller and void your power chair’s warranty.
Cleaning: Use only a water-dampened soft cloth to clean the ABS shroud. The shroud
has a protective coat that is very easy to maintain.
Do not use free-flowing water to clean your Compass HD
TM
. Water
and extreme temperatures are the main elements that can adversely
affect your power chair and its performance.
Water, Rain, Sleet, and Snow
Water, in any form, will cause electronic malfunction or corrosion of the electrical
components, connections, and the chair frame.
Temperature
♦ At extremely low temperatures, the batteries of your power chair may freeze,
preventing your Compass HD
TM
from operating.
♦ At extremely high temperatures, your power chair may operate at slower speeds
due to the controller’s thermal rollback feature that is designed to prevent damage to
the motors and to the other electrical components of the chair.