Golden Mask 5+ User Guide
GMD -
www.goldenmaskdetectors.com - Golden Mask Official Distributor
22
Golden Mask 5+ User Guide
GMD -
www.goldenmaskdetectors.com - Golden Mask Official Distributor
23
NOTE: The Light version of the detector is delivered without wireless headphones and
wireless transmitter. It does not have the WS/SP switch.
WARNING! The detector and the wireless headphones are factory-paired. You cannot
use other models and brands, only the ones the detector is delivered with will work.
Charging the detector batteries
The Golden Mask 5+ is delivered with pre-installed 10 x 2500mAh 1.2V AA-size NiMh
rechargeable batteries (this is subject to change, while shipping batteries in some destina-
tions is prohibited). The batteries have a life of around 300 cycles charge/discharge.
You can replace the supplied batteries with any standard-size NiMH rechargeable batter-
ies of type AA. You can also use standard AA 1.5V alkaline batteries.
To charge the detector batteries, connect the Golden Mask Smart charger jack to the
charging port of the detector on the backside of the battery box (see the above graphic).
A red light will be lit on the charger. After the charging is complete, the light will turn to
blue color. You can now disconnect the charger and start using the detector.
ATTENTION! Do not turn on the detector until the charging process is finished and
the charger is disconnected! Otherwise the detector electronics may be damaged!
INPUT UNIT:
Rated Voltage: AC110/220Vl
Voltage allowed: AC90—265Vl
Rated Freq: 50/60Hzl
Rated Current: 100mA (220V full load):
200Ma/100V
20mA (220V no load)
Max Current: 150mA (220V full load)
30mA (220V no load)
OUTPUT UNIT:
Ratedl Voltage:Automatically adjust from
6V—15V
Max voltage (with no load): 20V
Rated Current: 500mA (450mA---600mA)
Trickle Current: 35--50MmA (Pulsel ratio 1/20
+10mA)
Short Circuit Current: 10—20mA
Battery repairingl Current (Voltage less than 6V):
50-100MA
CONTROL UNIT:
V Detect: D -l -5mV
V Detect: 50—65SD 0
Temperature protect: Power Supplier IC =l
150°C
Temperature protect (optional): Battery
package 45—55°C
Using 10K MF52 NTC, B=3950
Battery numbers: 5—10 PCs series connected
Pulsel ratio: 31/32 512mS/Pirode
Timer: 6 Hours
ENVIRONMENT:
Ambientl Temperature: -10—40°C
Ambient Humidity: 30%—85%
Storagel Temp: -20 —70°C
Storage Humidity: 30%—90%
Specifications of the smart charger
WARNING!
Never try to charge non-rechargeable batteries!
Do not connect the charger to the detector when inside the bat-
tery box are installed non-rechargeable batteries!
Such action will cause fire!
Charging the headphones battery (except LITE version)
The wireless headphones are powered by an internal non replaceable battery. The head-
phones are charged through an USB cable (supplied within the package) by connecting it
to the supplied wall socket, to an USB adapter or by connecting it to the USB port of your
computer. A phone charger with standard micro-USB jack could be used as well.
The charging process is indicated by a green light on the headphones. When the light
turns off, the charging is complete and you can disconnect the USB cable and start using
the headphones.
Plug ON
No batteries
Charging Progress
Full charged, trickle on
Short circuit
Battery reverse
Repairing Batteries
NTC thermistor short
Battery voltage too low
Temperature protect
RED:BLUE flash show the charger is ready
BLUE
RED
BLUE
RED BLINK QUICKLY
RED BLINK QUICKLY
RED BLINK SLOWLY
BLUE BLINK SLOWLY
RED:BLUE:YELLOW BLINK ALTERNATELY
OFF
Multi-Color Indicating LED
WS
SP
Wireless headphones
position
Battery charging port
Speaker position
