19
21. Some sauna models are equipped with reading and/or roof lamps. Because the lamp
temperature will become very hot once powered ON, do not attempt to touch the lamp to avoid
being burned. Do not attempt to touch it for at least 20 minutes or until it cools down completely
if a need to touch it arises.
22. Do not pour water or any other liquids onto the infrared heat emitters. Do not bump, hit, or break
the heating elements as it may cause an electrical short and pose a safety risk.
23. Do not make any modifications to the sauna, the sauna structure, or the sauna components.
24. Prior to each sauna session, the sauna room is to be inspected for correct operation. If for any
reason your sauna does not seem to be operating properly, discontinue use and contact
Customer Service.
Safeguards For Your Sauna
1. Do not install the sauna near water, near a bathtub (if water will splash on the sauna), near a
shower (if water will splash on the sauna), in a wet basement, or near a swimming pool (if
water will splash on the sauna).
2. Do not use liquid cleaners or aerosol cleaners on the sauna. Unplug the sauna from the wall
outlet before cleaning. Use plain water and a soft damp cloth for cleaning.
3. The power supply cord should be routed so that it is not walked on or pinched by any object
that may be placed against it.
4. When replacement parts are required, be sure they meet the specified requirements of the
manufacturer. Unauthorized substitutes may result in a fire, electrical shock, or other
hazardous situations. After any repairs, please ask the service technician to perform a safety
check to determine that the sauna is in good working order.
5. Do not use any wall receptacle adapter or extension cord between the sauna cord and wall
outlet. If an extension cord must be used, please have a certified electrician make one that is
as short as possible. Make sure it is routed so as to not cause a safety issue, such as
individuals tripping over it.
Troubleshooting:
problem
possible reason
countermeasure
1
indicator light for power
supply not working
The connector is not connected
properly
Check the connector or replace a new
one
No power supply input
Check your circuit breaker to confirm
power at the wall outlet
Indicator light is broken
replace the circuit panel
