10
7. The Right Back Panel will align with the Right Side Panel. Once they are aligned and fit together
sung and tight, use the latches to buckle together. Do the same for the Left Back Panel and Left
Side Panel. Please note that the buckle has a guide tab that must be placed in the guide slot for
alignment.
See FIG-7
FIG-7
Assembling Right Side and Left Side Panels
8. Lay the Floor Heater onto the Floor Panel as seen in FIG-7. The Floor Heater can either be
screwed down to the floor using the provided screws or can be used as a floating heater to be
placed in different locations depending on what is comfortable for the user.
See FIG-8
FIG-8
Installing the Floor Heater
9.
Note: Be cautious with the glass door to avoid breakage.
To assemble the Front Panel, you
will need to unbuckle the Right Side Panel from the Right Back Panel. Next, remove the Right
Side Panel. Proceed to lift the Front Panel up and onto the Floor Panel and position it so that it
is centered on the Floor Panel. Now you can lift the Right Side Panel up and onto the Front
Panel locking the guide and guide inserts. Be sure that the Right Side Panel is flush with the
Front Panel at the top and then re-buckle the Right Back Panel with the Right Side Panel. It is
time to do the same to the Left Side. Unbuckle the Left Side Panel from the Left Back Panel.
Now you can lift the Left Side Panel up and onto the Front Panel locking the guide and guide
inserts. Be sure that the Left Side Panel is flush with the Front Panel at the top and re-buckle
the Left Back Panel with the Left Side Panel.
See FIG-9
