15
pressed for three seconds, the setting will increase quickly. Decrease the temperature in the
same manner by pressing the
button. After the sauna reaches the desired
temperature, the “Heat” light will turn off.
d.
Press the
button to turn the light ON. If you want to use the
Color Light
Therapy System
:
1.
While the interior light is ON, press and hold down the
button for 2
seconds. You will
notice “2n” in the LED display. This indicates you are in the “light”
mode. If you do not press any
buttons for approximately 15 seconds, the “2n” will
change back to the Timer mode.
2.
While the “2n” is displayed, you can now turn the exterior light ON/OFF by pressing the
button in the
section of the control panel.
3.
You can also turn the interior light ON/OFF by pressing the
button in the
section of the control panel.
4.
While the interior light is on and the “2n” is still displayed in the LED display, you can
press the
button to scroll through the different colors within the Color Light
Therapy System.
You will notice that you have two selections for “white”:
A.
The first selection for “white” will allow the colors to go through a sequence of
the different shades of colors.
B.
The second selection for “white” will continue to display the white light.
5.
To return back to the Timer mode, press the
button.
e.
You can operate the sauna with the ceiling vent in the open or closed position.
f.
After your sauna session is over, you can turn the control panel off by pressing the ON/OFF
button. You can unplug the sauna cord or switch the heavy duty surge protector to the OFF
position.
g. To set the time
, press the
buttons. Press
‘
and
buttons to set the
timer from 5 to 60 minutes. If pressed for three seconds, the timer will increase/decrease
quickly. To extend the sauna session, reset the timer again by pressing the
.
h. The Fahrenheit and Centigrade display
can be switched by pressing and holding the
