Goldair select ETR3BSS, Руководство по эксплуатации

Страница: 7 / 10

MOUNTING
•
Choose a suitable position on the wall to mount the Heated Towel Rail. The flex entry must
be horizontal and at the bottom of the frame.
•
Fit the leg brackets shown in figure 1.
•
Place the Heated Towel Rail on a flat surface, check that all the leg brackets are sitting
parallel, if not parallel, re-tightening may be required. Do not over tighten or parts of the
towel rail may break.
•
Line up the towel rail on the wall, screw the lugs onto the wall in the correct positions. Place
the legs over the lugs and tighten the grub screws to ensure the towel rail stays in position
on the wall.
PRE WIRING
NOTE: Only drill holes when you are 100% sure of your measurements.
A means for disconnection must be incorporated in the fixed wiring in accordance with the
wiring guidelines AS/NZS 3000:2007.
Electrical Installation
WALL MOUNTED TOWEL RAILS ARE ONLY TO BE MOUNTED ON HEAT RESISTANT
WALLS THAT COMPLY WITH CURRENT AS/NZS SPECIFICATIONS & BUILDING
REGULATIONS