Water Drainage of your Dehumidifier
WATER DRAINAGE
When the water container is full:
•
An alarm signal will sound.
•
The compressor will stop automatically. This will
also stop the dehumidification process.
Empty the water container and replace it in the
correct position. The Dehumidifier will continue
dehumidifying when the compressor automatically
starts (after three minutes). If desired, it is possible to
connect a drainage tube (not supplied) to the device
for permanent water drainage. If this option is
desired you will need to purchase a suitable tube
from your local hardware retailer
(Goldair does not
hold tubes as spare parts).
Connect the drainage hose to the drain spout and
ensure that the end of the hose is lower than the
drain opening, otherwise the water will not drain and
flooding may occur. Also ensure the water tank is in
position (in the unit) otherwise the continuous
drainage will not operate. Place the end of the
drainage hose in a drainage outlet. When you no
longer wish to use the permanent water drainage,
disconnect the drainage tube from the device.
Ensure that the water container is positioned
correctly.
