Goldair GIR500, Руководство по эксплуатации

Страница: 6 / 16

Components and Assembly
WARNING:
Heater must not be used without the feet, castors, wheels fitted.
ASSEMBLY OF HEATER
1.
Carefully turn the Main Body upside-down on a scratch-free and stable surface. Be careful
to prevent damage to the cosmetic finish or your floor surfacing.
2. Unscrew the wing nuts underneath the appliance. Attach the feet to the base of the
appliance by aligning the holes in the wheel plate with holes in the appliance.
3. Secure the wheel plate by tightening up the wing nut. Use one screw for each foot.
4. After securing all the wheels on the heater, put the appliance back in the upright position.
Main Body x 1
Remote x 1
Wheels & Feet x 2 Wing Nuts x 4