Goldair GIR500, Руководство по эксплуатации

Страница: 13 / 16

SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
Operating Your Heater
TECHNICAL SPECIFICATION
Model No: GIR500
Supply: 240VAC 50Hz
Wattage: 2200W
SAFETY DEVICES
This appliance has one protection devices:
•
Tilt Switch - this will automatically turn the appliance off if the appliance is not in the correct
operating position.
CAUTION:
The heater generates heat during use. Proper precautions must
be taken to prevent the risk of burns, scalds, fires or other damage to persons.
CARE AND CLEANING
The heater requires regular cleaning to ensure trouble free operation:
•
Unplug the heater from the mains supply before cleaning.
•
Ensure that the heater has been allowed to cool down completely before cleaning.
•
The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging the appliance and vacuum cleaning the air
vents and grills.
•
The reflector body can be cleaned by using a dry duster or soft brush through the grill, taking
care not to damage the glass tubes.
•
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
•
Never use solutions such as petrol, thinners or polishing agents.
•
Ensure the heater is dry before plugging back into the mains supply.
STORAGE
In case you are not planning on using the appliance for a long period of time, we recommended
that you store your heater.
•
Switch off and unplug the heater. Let the heater cool down completely.
•
Clean the heater (refer to CARE AND CLEANING section above) and let it dry well before
disassembling the wheels.
•
Place the appliance, wheels, and remote control in a dry, well ventilated space.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.