5
(+ and -) marked on the inside of the compartment, then reinstall the left battery
cover.
4.
Slide the battery cover on the right off in the direction the arrows point.
5.
Place a 9V battery into the battery compartment matching the polarity symbols
(+ and -) marked on the inside, then reinstall the right battery cover.
Caution:
If you don
’t plan on using the metal detector for a week or more, remove the
batteries. The batteries can leak chemicals that can destroy the electronic
components of the metal detector.
Warning:
Dispose of the old batteries promptly and properly. Never bury or burn any
batteries.
USING HEADPHONES
1. Insert the stereo headphones into the 6.3mm plug (PHONE jack). At this time
the external speaker will be disconnected and muted.
2. Rotate the volume control to the minimum position. After putting on the
headphones, set the volume to desired level.
Listening Safely
To protect your hearing, set the volume to the lowest setting before you begin
listening, then adjust the volume to a comfortable level.
Do not listen at the maximum (highest) volume level. Listening for an
extended amount of time at the highest volume can lead to permanent
Main box
battery
Battery cover
