Pop-O-Gold
http://www.gmpopcorn.com
Page 6
CONTROLS AND THEIR FUNCTIONS
LIGHT SWITCH
This switch operates all the lights; interior and dome on your popcorn machine.
WARMER SWITCH
This switch operates the forced air popcorn crisping system.
KETTLE HEAT SWITCH
This switch operates the heating elements in the popping kettle.
KETTLE MOTOR AND EXHAUST SWITCH
This switch operates both the kettle agitator motor and the exhaust blower. The exhaust blower is only
required when popping corn.
OIL SYSTEM MASTER SWITCH
This sends power to the oil pump. (Either the Bucket Pump or Bag-in-a-Box models) The warmer/blower
on the oil pump is activated, as well as the heated line kits (If provided/purchased separately). The
warmer/blower on the oil pump will keep coconut popping oil liquid if the doors on the base are kept
closed. It may be desirable to keep this switch on at night, if you have problems keeping the coconut oil
liquid. Coconut oil will congeal at temperatures below approximately 76º F [24º C]. (Reference the
Instruction Manual for the oil dispense unit.)
RED OIL DISPENSE PUSH BUTTON SWITCH
When pushed, this switch will dispense the pre-set amount of oil into the kettle. (Reference the
Instruction Manual for the oil dispense unit to program the oil dispense volume.)
YELLOW LIGHT AND AUDIBLE SIGNAL (LOAD-DUMP)
Alerts the operator to:
1.
Load the corn and oil or
2.
Dump the popped corn from the kettle or
3.
Turn off the kettle heat switch if they are done popping corn
FLEXI-POP SWITCH (IF EQUIPPED)
This switch changes energy to kettle for the load switch from 32oz to 18oz. It will automatically adjust the
oil amount on the 2257D model of oil pump. The blue light & the blue cup are for the 32oz and the red are
for the 18 oz.
SALT AND SWEET SWITCH (IF EQUIPPED)
This switch changes the temperature setting to 50ºF lower for the sweet option.
