Karmel King
Model No. 2620, 2621, 2630, 2631
Page 5
gmpopcorn.com
Setup
1.
Remove all packaging and tape, and accessories before starting operation.
2.
This unit must be properly fastened to a sturdy counter, see illustration below for counter
mounting requirements.
Paddle and Drum Assembly
1.
Prior to operation, rotate the top paddle from the shipping position into the mix
position—reference images on next page for paddle and drum assembly:
a)
Pull plunger knob out and lift paddle into position.
b)
When positioned, release knob and make sure the plunger securely sets into its
hole in the shaft to lock the paddle in place.
2.
After setup, the unit should be cleaned prior to use (see Care and Cleaning section).
6.50”
17.375”
3” Minimum Clearance
between Kettle and Wall.
2.00”
4 Holes for
5/16” Dia. Bolts
19.375”
15.585”
5/16-18
Grade 5 Nut
2” Dia. X 1/8” Thick
Fender Washer
5/16-18
Grade 5 Bolt
3/16” Minimum
Thickness for
Stainless Steel
Over Wood
3/4” Minimum
for Wood or
Wood Plastic
Products
56.75”
48.00”
21.278”
6” Recommended Min. Clearance
between wall and Cntl Box for Service.
23.00”
28.312”
3” Min. Clearance
between Kettle
and Wall.
3” Minimum Clearance
between Kettle and Wall.
4 Holes for
5/16” Dia. Bolts
6 .50”
2.00”
17.375”
19.375”
2” Dia. X 1/8” Thick
Fender Washer
3/4” Minimum
for Wood or
Wood Plastic
Products
5/16-18
Grade 5 Bolt
3/16” Minimum
Thickness for
Stainless Steel
Over Wood
6” Recommended Min. Clearance
between Wall and Cntl Box for Service.
56.75”
21.278”
48.00”
5/16-18
Grade 5 Nut
15.585”
28.312”
23.00”
3” Min. Clearance
between Kettle
and Wall.
