Gold Medal G-Whiz 5908, Инструкция по эксплуатации

Страница: 14 / 33

G-Whiz Gas Popper Model No. 5908 and 5908GGT
Page 14
gmpopcorn.com
Electrical Installation Instructions
DO NOT connect this unit to a power source until gas installation is complete (reference the Gas
Installation Instructions section of this manual).
Electrical Requirements
This unit must be wired in accordance with local electric and building code requirements by a
qualified technician. Model 5908 and 5908GGT are supplied with a black (negative) lead and a
red (positive) lead as shown in the image below.
The following power supply must be provided:
12 Volt DC (Battery not included with this unit; customer must supply 12 volt battery for
proper machine operation.) Follow all safety precautions provided by the battery
manufacturer.
5908: 5.6 AMPs
5908GGT: 6.8 AMPs
Before Connecting Unit to Battery
1. Make sure all machine switches and gas valves are OFF, before connecting the unit to
the battery.
2. Cables must be attached to the proper polarity. Red is “+” positive; black is “-” negative.
3. Install the unit in a level position.
Black Lead
(Negative) Red Lead
(Positive)
Model 5908 shown for general
image reference (wire nuts and
battery not included).