Fudge Cooker/Mixer
Model No. 2183-00-000
Page 9
gmpopcorn.com
DIGITAL HEAT CONTROL
The Digital Heat Control adjusts the set point temperature of the unit for making fudge.
Operate Mode:
In Operate mode, the Heat Control “set point temperature” is factory
preset to 185°F. This is the temperature needed to achieve an approximate
“Product Temperature” of 160°F. See Heat Control Adjustment section for
adjusting the set point temperature.
Clean Mode:
In Clean mode, the Heat Control set point temperature is factory preset
higher at 230°F, for cleaning the unit. See Heat Control Adjustment section for
adjusting the set point temperature.
Buttons/Indicator Light Descriptions
UP Button / DOWN Button
– adjusts the Set Point Temperature UP or DN.
Index Button
– scrolls through the temperature digits (ones, tens, hundreds) to
adjust the set point in larger increments.
Enter Button
– locks in temperature adjustments made with the UP or DN Buttons,
(Reference the Digital Heat Control Adjustment section.)
Digital Display
•
The upper temperature shown on the display (in yellow background) is the heat
sensor (RTD) temperature; this is not the same as the product temperature.
•
The lower temperature shown on the display (in green background) is the set point
temperature, factory preset to 185°F. (Reference the Digital Heat Control
Adjustment section.)
OUT 1/Heating Indicator Display
•
OUT 1 and Heat Indicator Display are ON when the unit is heating.
•
When OUT 1 and Heat Indicator Display turns OFF, unit has reached set point
temperature.
Digital Heat Control
Set Point Temperature
(shown on GREEN
background)
Fahrenheit or Celsius
Indicator
Heat Sensor Temperature
(shown on YELLOW
background)
Enter Button
Locks in temperature
adjustments.
DOWN
Button
UP Button
INDEX
Button
OUT 1 and Heat Indicator Display
(When ON, indicates unit is heating;
turns OFF when unit reaches set
point temperature.)
Key Icon
(indicates all parameters,
EXCEPT Set Point, are locked)
F1 and F2 Buttons
(no parameters set, do not use)
