Fudge Cooker/Mixer
Model No. 2183-00-000
Page 6
gmpopcorn.com
Fudge Mixer Paddle and Drum Assembly/Disassembly
Items needed:
Mixing Drum, Drum Seal, Retaining Ring, Fudge Paddle, (1) short Wing Bolt,
Candy Thermometer.
Follow the directions shown to assemble the paddle and mixing drum.
1.
Slide the fudge paddle onto the agitator shaft and fasten in the top hole with a short wing
bolt.
2.
Finger tighten wing bolt to secure.
3.
Mount the kettle gasket and mixing drum on the kettle bottom, and fasten with the
retaining ring.
4.
As needed, insert the thermometer in the holder located on the fudge paddle.
Fudge Mixer
Kettle Assembly
Agitator Shaft
(attach paddle in
top hole position)
Fudge Paddle
(fastens to shaft with
a short wing bolt)
Mixing Drum
Retaining Ring
Drum Seal
Kettle Bottom
After assembly close Retaining
Ring clasp to secure.
Thermometer
Holder
Thermometer
Scraper
Retainer
Scraper
Wing Nut
