Golander
BT103S Manual
15
4) Set time unit and duration for each dose, pause time
between doses, set number of cycles.
5) Return to main screen.
Number of
Cycles
Stop
Start
Dispense
Duration
Dispense
Duration
1
0
Dispense
Duration
N
Lag Time
Lag Time
Stop
Press
START/STOP
Stop
Run N times
Figure 17. Dispense Cycle Setting
To run Time Dispense:
1) Press
DIRECTION
key to set the running direction,
clockwise or counterclockwise.
2) Press
START/STOP
key to start dispensing.
3) During operating, press
START/STOP
key to stop the drive
anytime when necessary.
4) A footswitch can be used to start/stop pump.
7.7
Logic Level 1 Control Mode (footswitch)
Use external logic level signal to control start and stop. Use the
keypad to control direction and speed.
lev1
32.5rpm
Figure 18. Logic Level 1 Control Mode
1) Switch the power off. Wire the DB15 connector as shown on
, and connect it to the DB15 port on
the rear of the pump.
