Golander
BT103S Manual
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
RS_W
Figure 19. Logic Level 1 Control with Internal 12V Power Source
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
12VDC
VCC_W
COM
RS_W
Figure 20. Logic Level 1 Control with External 12V Power Source
2) Turn on the power switch. Pump will display the main screen.
3) Press
MODE
key to change the mode to Logic Level 1
control mode (shows lev1 on the screen).
4) Press
UP
or
DOWN
key to adjust the speed.
5) Press
DIRECTION
key to change the rotating direction.
6) When the switch is closed, the drive will start running; when
the switch is open, the drive will stop.
Note: Use this mode to work with a TIME CONTROLLER.
7.8
Logic Level 2 Control Mode (footswitch and
direction switch)
Use external logic level signal to control start, stop and direction.
Use the keypad to control speed.
