Golander
BT103S Manual
5
PRIME
key. Press the key to run pump at maximum
allowed speed in the direction shown on the display. Press again
to return to the previous state.
DIRECTION
Key. Press to key to change the drive rotating
direction, clockwise or counterclockwise.
START/STOP
key. Control the start and stop of the motor.
When on the setting men, press this key to enter the submenu.
4.2
LCD Screen Display
Data entry:
When the drive is not running, press the number to
input desired value in the pop-up window. See the picture below.
Int
32.5rpm
A
B
G
C
D
E
F
Figure 3. Display screen
4.2.1
A. Control Mode
It displays current control mode. Press
MODE
key to switch the
control mode: Internal Control mode, External Control mode, Time
Dispense mode, Logic Level 1 control mode or Logic Level 2
Control mode.
•
: Use the keypad to operate pump. Use
optional external logic signal to control start and stop.
•
: Use external analog signal to control
rotation speed. Use external logic signal to control direction,
