Golander pump BT-F NEW Скачать руководство пользователя страница 3

Страница: 3 / 44

BT-F NEW Intelligent Dispensing Peristaltic Pump

Safety Cautions

Danger

: Please use correct AC power voltage source shown on

the sticker on the equipment to avoid any damage.

Please do not open the case. High voltages exist and are

accessible. Use extreme caution when servicing internal components.

For maintenance, please contact the manufacturer or distributor directly.

Danger

: Turn drive off before removing or installing tubing. Fingers or

loose clothing could get caught in drive mechanism.

Warning

: Tubing breakage may result in fluid being sprayed

from pump. Use appropriate measures to protect operator and

equipment.

Warning

: Remove power from pump before attempting any maintenance

or any cleaning operation is started.

Warning

: Remove power from pump before connecting or disconnecting

the external control device or communication interface.

Warning

: Pump is provided with a grounded plug, it must be well

grounded at all times.

Warning

: This product is not designed for, nor intended for use in patient

connected applications; including, but not limited to, medical and dental

use.

Description

BT/F new type intelligent dispensing peristaltic pump suitable for

Measured accurately and dosing certain volume liquid to realize high

accuracy flow rate control. Compared with the previous version, it adopts

larger color LCD touch screen, more convenient and show more

information. Added recycle dispense mode can realize complex

experimental process and different Lab requirements.RS485

communication adds more settings on the basis of MODBUS to meet

different communication equipment requirements.

This pump series includes:

•

BT100F, flow rate:

0.00011-720 mL/min, speed: 0.1-150 rpm

Содержание BT-F NEW













































Результаты поиска

Содержание BT-F NEW

Отзывы:

Похожие инструкции для BT-F NEW

Бренды по названию

Популярные бренды

Golander pump BT-F NEW, Руководство по эксплуатации

Результаты поиска

Содержание BT-F NEW

Отзывы:

Похожие инструкции для BT-F NEW

Бренды по названию

Популярные бренды