BT-F NEW Intelligent Dispensing Peristaltic Pump
39
2. Check if the key is broken.
6
Hardware
External
control does
not work
1. Check the wiring of the
connector.
2. Check if the external control
power voltage is provided.
3. Check the connections of the
external control board.
7
Hardware
RS485 com
does not
work
1. Check the wiring of the
connector.
2. Check if the external control
power voltage is provided.
3. Check the connections of the
communication board.
8
Hardware
Noisy when
running
Check the screws and level on
pump head to make sure they
are secure.
9
Software
External
control does
not work
Check if pump is on External
Control Mode.
10
Software
Flow not
precision
1. To make calibration again.
11
Software
RS485 does
not work
right
1. Check if the display shows
the communication is ready.
2. Reset the address of the
pump.
3. Check whether on the bus
there are two pumps using the
same address
If the problem cannot be solved, please contact the manufacturer
or distributor.
This product is not designed for, nor intended for use in patient
connected applications; If use as the accessories, the medical or
dental equipment need to make certification.
