Caramatic DriveOne
16 / 36
Installation position
Vertical version
Horizontal version
Incorrect
To ensure the correct function, the safety gas pressure regulation device
Caramatic DriveOne must:
•
be tightly screwed onto a stable wall / ceiling (with 2 screws – not included in the delivery),
•
be installed vertically on a stable wall or horizontally on the ceiling of the gas cylinder crate,
depending on the version,
•
the trigger element must always sit in a vertical position (see arrow above),
•
the installation direction must be observed. This is indicated by an arrow on the safety gas
pressure regulation device.
Correct
Incorrect
The safety gas pressure regulation device Caramatic DriveOne must be
assembled in such a way that the hose assembly connections are in the highest possible
position, at least above the gas cylinder valve.
To prevent re-liquefied gas getting into the regulator, this pressure regulator may not be
installed lower than the tank or cylinder valve. Pipes and hoses that are connected to the inlet
connector of the pressure regulator must have a constant downward incline to the tank or
cylinder.
