5.2 Charging the Gogoro Network® Battery
For users who are far away from the GoStation® or are inconvenient to swap batteries, Gogoro
also provides several charging means according to the Smartscooter® model, model year, tariff
plan and sales area.
●
GoCharger® Series:
○
It charges the batteries directly. Just pull the batteries out of the scooter and put
them into the GoCharge®.
○
The GoCharger® needs to be connected with the internet, to authenticate the
batteries and exchange data with the cloud server.
○
The GoCharger® is compatible with all 2-battery scooters, but it may not
support certain subscription plans of Gogoro Network®.
●
GoCharger® Mobile Series
○
Connect the charger with the scooter to charge the batteries.
○
Before charging you might need to authenticate the batteries and perform data
exchange with smartphone and Gogoro® App.
○
Each scooter model needs to use a compatible charger. The scooter needs to
install the charging connector that is compatible with the specific charger, and
enable the charging service on the cloud server.
○
Gogoro 1 series and VIVA series (single battery models) are not compatible with
GoCharger® Mobile.
Please contact the Gogoro service center in your area to confirm which charging means is
applicable.
It is strictly forbidden to use charging methods that are not officially approved by Gogoro
Network® to avoid danger.
Swapping batteries at GoStation® is the default use scenario of Smartscooter®. The required
software and hardware for charging are not installed on Smartscooter® at the factory. If you
67
