Gogen Maxipes Fik, Инструкция по эксплуатации

Страница: 26 / 40

EN - 24
POWER SOURCE
This unit is designed to be operated on AC/DC.
AC OPERATION
Plug the tail of AC power cord into AC socket on unit and the plug into household AC outlet.
The batteries will be automatically disconnected.
DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM-2/C size batteries (not included)
into compartment. Please follow correct polarities as indicated.
CAUTION
Remove batteries if they are flat or not being used for a long period of time.
Batteries contain chemical substances, so they should be disposed of properly.
BASIC FUNCTION
SWITCHING ON THE UNIT
After connecting the power, press the SOURCE button to turn the unit ON, press and hold the
SOURCE button to turn the unit OFF.
NOTE : In CD/MP3/USB/AUX mode, when the unit is not providing the main function for
15 minutes, the unit will automatically switch into standby mode.
ESD hints – The product maybe reset or not reset to operation of control due to electrostatic
discharge, just switch off and reconnect again.
ADJUSTING VOLUME
Press
VOL.+/-
button to increase or decrease volume..
RADIO OPERATION
1. Press the SOURCE until to select the FM band(this unit is designed for FM ONLY).
2. Tune to desired station by press the

/TUN- or

/TUN+ on unit, the display will show the
band frequency. Example: FM 97.10 MHz.
3. Extend FM ANTENNA to its full length and gently move the unit back and forth to get the
best reception, or place the unit in an open location.
4. Press the SOURCE button to select other functions, or turn off the unit.
AUTOMATIC TUNING STOP
Press and hold the

/TUN-
or

/TUN+
to start tuning, Tuning stop automatically when a stati -
on is received.
RADIO AUTO SCAN (SEARCH)
Press and hold the SCAN button on unit, the unit will conduct auto scan and program until having
found a strong signal. The unit will start to broadcast from the P01 after searching finished.
RADIO STATION MEMORY OPERATION
You may pre-store 30 (FM) radio stations in memory for your preference, so as you can listen to
your desired station directly and quickly, no need to tuning and search for again.
1. Press the

/TUN- or

/TUN+ button to select the first desired station. The press MEM./
PROG. button on unit , “ P01 ” will flash and „PROGRAM“ will show on the display.