Open 2 HANDLES fully , turn ROTATING
KNOB Counter-Clockwise to unscrew
THREADED MANDREL from the Gripped
RIVET NUT and WORKPIECE .
Still hold to squeeze 2 HANDLES to touch
REAR BODY , adjust the STROKE
ADJUSTER upwards to increase the Stroke
Distance 1.0mm or 0.04" step by step.
Squeeze 2 HANDLES to grip again RIVET
NUT until 2 HANDLES touch REAR BODY
and RIVET NUT is set firmly. If RIVET NUT
is still not set firmly, repeat the above steps
until RIVET NUT is set firmly.
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
K. TROUBLESHOOTING
K-1) IF THE RIVET NUT IS NOT SET FIRMLY AT THE FIRST FASTENING OPERATION,
HOW TO RE-SET THE RIVET NUT FIRMLY:
10
NON-GRIPPED
RIVET NUT
1
1
2
NON-GRIPPED
RIVET NUT
REAR BODY
GRIPPED
RIVET NUT
Adjust Up
STROKE ADJUSTER
To Increase
STROKE DISTANCE
1
1
2
2
1
2
Open 2 HANDLES fully , turn ROTATING
KNOB Clockwise until RIVET NUT touches
NOSEPIECE Slightly .
2
WORKPIECE
NOSEPIECE
1
1
4
1
1
2
1
2
NOTE:
If the THREADED MANDREL still
can not unscrew from the Gripped RIVET
NUT and WORKPIECE, turn whole TOOL
Counter-Clockwise to unscrew THREADED
MANDREL completely.
3
5
1
WORKPIECE
NOSEPIECE
1
1
As the proper Stroke Distance has been
re-adjusted, the Protruding Length (L) of
THREADED MANDREL needs to be
adjusted again to be same as RIVET
NUT Height (H), L = H, as per the above
"G" instruction.
GRIPPED RIVET NUT
+ WORKPIECE
GRIPPED RIVET NUT
+ WORKPIECE
Turn WHOLE TOOL
Counter-Clockwise
THREADED
MANDREL
WORKPIECE
L = H
PROTRUDING LENGTH (L)
OF THREADED
MANDREL
RIVET NUT HEIGHT (H)
L
H
Rotate
NOSEPIECE
2
GRIPPED RIVET NUT
+ WORKPIECE
THREADED
MANDREL
REAR BODY
NOTE
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
NOSEPIECE
Turn
ROTATING KNOB
Clockwise
Turn
ROTATING KNOB
Counter-Clockwise
