F. HOW TO ADJUST THE PROPER STROKE DISTANCE
6
SMALL RULE
HOLE IN
WORKPIECE
WORKPIECE
THICKNESS
NOTE:
The SMALL RULE is specially designed to
measure the WORKPIECE Thickness.
NOTE
2
First Way: Rotate STROKE ADJUSTER to find out the
Figure on the STROKE INDICATOR parallel with the
Bottom Edge of the STROKE ADJUSTER:
Figure on STROKE INDICATOR = Stroke Distance
3
Second Way: Rotate STROKE ADJUSTER to find out
the Total Exposed Black Lines of the STROKE
INDICATING LINES:
1 Black Line = 1 mm or 0.04¨ Stroke Distance
1
1
Close 2 HANDLES completely , rotate STROKE
ADJUSTER to adjust the proper Stroke Distance in
2 popular ways.
2
4 mm
4 mm
Total Exposed Black Lines = Stroke Distance
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
Rotate
STROKE ADJUSTER
1
1
2
FIGURE ON STROKE INDICATOR
= STROKE DISTANCE
STROKE INDICATOR
Rotate
STROKE ADJUSTER
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
1 BLACK LINE = 1 mm OR 0.04"
TOTAL EXPOSED BLACK LINES
= STROKE DISTANCE
Rotate
STROKE ADJUSTER
[ WARNING ]
The proper Stroke Distance is decided as per the WORKPIECE Thickness and the Grip Range of RIVET NUT.
Each RIVET NUT has its own Grip Range, the Maximum Grip and Minimum Grip.
The WORKPIECE Thickness must be WITHIN the Grip Range of RIVET NUT or BETWEEN the Maximum Grip
and Minimum Grip of RIVET NUT for safe and firm fastening.
If the Maximum Grip of RIVET NUT is SMALLER than the WORKPIECE Thickness, this TOOL and RIVET NUT
Threads might be damaged.
If the Minimum Grip of RIVET NUT is LARGER than the WORKPIECE Thickness, this RIVET NUT cannot be
gripped firmly in the WORKPIECE.
Adjusting TOO LONG Stroke Distance might damage this TOOL and RIVET NUT Threads, while TOO SHORT
Stroke Distance cannot fasten RIVET NUT firmly in the WORKPIECE.
