Disassembly:
Disconnect the tool from the source of compressed air, unscrew the front nozzle /fig.2 - pos.9/ by
means of a spanner no. 23, set the spanner no.17(15) onto the clamping sleeve /fig.2 - pos.3/, set
the spanner no. 17 on the backnut /fig.2 - pos.6/ and loosen. Unscrew the clamping sleeve, replace
the jaws /fig.2 - pos.2/ and conduit-suction complet /fig.2 - pos.8/. All used threads are clockwise.
Clean the dismounted parts thoroughly and check them visually, especially the following:
1) Jaws /fig.2 – pos.2/ - if worn or damaged, replace it, if dirty, clean it with a wire brush.
2) Nose-piece /fig.2 – pos.1/ - for wear of functional surfaces of the taper.
3) Conduit-suction complet /fig.2 - pos.8/ - inspect parts of the assembly, jaw pusher /fig.2 -
pos.804/, spring /fig.2 - pos.803/, washer of spring /fig.2 - pos.803/, O - ring /fig.2 - pos.802/ and
conduit-suction /fig.2 - pos.801/ - if damaged or worn, replace it with a new one.
4) Front nozzle /fig.2 - pos.9/ - check for damage of the internal surface (Ø 20) .
5) Scraper ring /fig.2 - pos.5/ - if damaged or worn, replace it with a new one.
6) Mandrel container - if the mandrel container or its bottom are worn or damaged, replace them
with new ones, otherwise there is danger of the torn-off shank popping out.
Assembly:
Mount the parts (see par. disassembly) in a reverse order. On the outer surface of the jaws /fig.2 –
pos.2/ apply a drop of lubricating oil ( we recommend hydraulic oil HYSPIN AWHM 32 CASTROL),
apply thin layer of plastic lubricant MOGUL LV 2-3 to the conduit-suction complet /fig.2 – pos.8/.
Basic set-up of the jaws is performed as in fig.3.
3.3. General maintenance
General maintenance should be performed after about 500 000 strokes or once every three years.
The tool must be completelly disassembled and all seals and worn parts must be replaced. This
repair may be carried out by an authorized technician only or a person trained by the manufactu-
rer or supplier.
Fig.3
ENGLISH
AIR POWER 3
18
Содержание Air Power 3
Страница 11: ...AIR POWER 3 ESKY 11...
Страница 21: ...AIR POWER 3 ENGLISH 21...
Страница 31: ...AIR POWER 3 DEUTSCH 31...
Страница 32: ...N 8340000001123...