
2) Vertical movement of the trigger – switching off the suction.
– Press and lock the trigger (after pressing shift it up cca 1,5 mm), then release the trigger,
the suction is switched off.
– Unlock the trigger (shifting the trigger down to the stop) and release it. The suction is
switched on and the trigger is in position see fig. 1.
The tool is equipped with a multifunctional mandrel container /fig.1 - pos.32/ which has the
following positions:
Position 0 – mandrel container removed
Position 1 – mandrel container mounted, suction is switched off
Position 2 – mandrel container mounted, suction is switched on
1) Mounting the mandrel container:
Put and push the mandrel container /fig.1 - pos.32/ into the ring relief /fig.1 – pos.26/ end-to-end,
thus you depress the arrestment element, and turn to position 1 or 2. The mandrel container shall
thus be in place. The suction shall initiate in position 2. Relative position of the mandrel container
with air outlets /fig.1 - pos. 32/ and the ring relief /fig.1 – pos.26/ ensures that the outlet air pres-
sure goes out in a suitable direction (e.g. offward the operator of the tool).
2) Removing the mandrel container:
Turn the mandrel container /fig.1 - pos.32/ end-to-end to position 0 and pull it out of the ring relief
/fig.1 – pos.26/. The suction shall thus switch off.
The tool can be operated in the following manners:
1) with the mandrel container removed in position 0:
Suction switches off by turning and removing the mandrel container /fig.1 - pos.32/. Insert BR into
the riveting tool through the nose-piece hole. Depress the trigger to move the jaws offward the BR
head. The movement ends when reaching max. stroke, correct BR with respect for material gauge
shall tear off the shank (riveting) for one stroke of the tool. Releasing the trigger shall return the
jaws to initial position and released torn-off shank can be removed from the nose-piece by tilting
the tool. /fig.1 - pos.1/.
2) with the mandrel container mounted in position 1:
Mounting and turning the mandrel container /fig.1 - pos.32/ to position 1 shall arrest it. Insert BR
into the riveting tool through the nose-piece hole. Depress the trigger to move the jaws offward
the BR head. The movement ends when reaching max. stroke, correct BR with respect for material
gauge shall tear off the shank (riveting) for one stroke of the tool. Releasing the trigger shall return
the jaws to initial position and the released torn-off shank can be transported into the mandrel
container by tilting the tool.
3) with the mandrel container mounted in position 2:
Suction switches on by turning the mandrel container /fig.1 - pos.32/ to position 2. In this position
the suction holds BR in the nose-piece /fig.1 - pos.1/ which enables riveting in any position without
danger of BR falling out of the nose-piece of the tool. Depressing the trigger shall perform riveting.
Releasing the trigger shall transport the shank into the mandrel container. If the mandrel container
ENGLISH
AIR POWER 3
16
Содержание Air Power 3
Страница 11: ...AIR POWER 3 ESKY 11...
Страница 21: ...AIR POWER 3 ENGLISH 21...
Страница 31: ...AIR POWER 3 DEUTSCH 31...
Страница 32: ...N 8340000001123...