Digital Video Recorder: User Manual
35
4.6 System information
4.6.1 Hard disk information
Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on.
Clue:
Means that the hard disk is normal. X means that the hard disk is broken down. – means that there is no hard disk. If the user needs to change
the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks then install a new one. * behind serial number means
the current working disk such as 1*. If the corresponding disk is damaged, the information will display “
?
”.
4.6.2 Code stream statistics
Display the code stream (Kb/s) and hard disk capability (MB/s) in real time. It displays as the wave sketch map.
4.6.3 Log information
Look up system log according to the set mode.
Log information include:
System operation, configuration operation, data management, alarm affair, recording operation, user management, file
management and so on. Set the time section to look up and click the look up button. The log information will display as a list. (one page is 128
items) Press
Page up
or
Page down
button to look up and press
delete
button to clear all the log information.
4.6.4 Edition information
Display the basic information such as hardware information, software edition, issue data and so on.
4.7 Shut down system
Refer to chapter 3.5.8.
