Digital Video Recorder: User Manual
24
Remove
: Clear the file information.
Add
: Show the file information satisfying the set file attributes.
Start/Pause
: Click the play button to start the backup and click the pause button to stop the backup.
Cancel
: During backup you can exit the page layout to carry out other functions.
4.3 Alarm Function
Alarm functions include: motion detect, video loss, alarm input and alarm output.
4.3.1 Motion Detect
When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on and the linkage functio n is turned on.
Picture 4.4 motion detect Picture 4.5 set the area
Picture 4.6 set the time section Picture 4.7 PTZ Activation
[
Channel number
] Choose the set motion detect channel.
[
Enable
] Means that the motions detect function is on.
[
Sensitivity
] Choose in the six options according to the sensitivity.
[
Area
] Click setup and enter the set area. The area is divided into PAL22X18. Green block means the current cursor area. Yellow block means the
dynamic detect defensive area. Black block means the unfenced area. You can set the area as followed. Drag the mouse and draw the area.
[
Period
] Trigger the motion detect signal in the set time section. You can set according to week or set uniformly. Each day is divid ed into four time
sections. Means the set valid.
[
Interval
] Only one alarm signal is turned on (even there are several motion detect signals) in the set interval.
