Digital Video Recorder: User Manual
25
[
Alarm output
] Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on.
[
Delay
] Delay a few moments and stop when the alarm state is turned off. The range is 10-300 seconds.
[
Record channel
] Choose the recording channel (multiple options supportive). Trigger the video signal when the alarm is turned on.
Note: Set in the [recording channel] and perform the linkage recording. Start detecting video files in the corresponding t ime section.
[
PTZ Activation
] Set the PTZ linkage when the alarm is turned on.
Note: PTZ linkage is set in the [shortcut menu] > [PTZ control]. Set the tour between spots, trail tour and so on
.
[
Show message
] Pop the alarm information dialog box in the local host computer screen.
[
] Means sending an E-mail to user when the alarm is turned on.
Note: Set in the [network service] and send an E-Mail.
Picture 4.8 video loss Picture 4.9 alarm input Picture 4.10 Abnormality
4.3.2 Video Loss
When the equipment cannot obtain the channel video signal , the video loss alarm is turned on and the linkage function is turned on.
Set method: refer to chapter 4.3.1.
4.3.3 Alarm input
When the equipment obtains the external alarm signal, the alarm function is turned on.
Set method: refer to chapter 4.3.1.
