Digital Video Recorder: User Manual
31
4.4.6 PTZ setup
[Channel]
Choose the dome camera input channel.
[Protocol]
Choose the corresponding dome protocol, (PELCOD as an example).
[Address]
Set as the corresponding dome address. Default 1. (Note: The address must be consistent with the dome address.)
[Baud rate]
Choose the corresponding dome baud rate length. You can control the PTZ and vidicion. Default: 115200.
[Date bit]
Include 5-8 options. Default: 8.
[Stop bit]
Include 2 options. Default: 1.
[Parity]
Include odd check, even check, sign check, blank check. Default: void.
4.4.7 Serial port setup
Picture 4.24 PTZ setup Picture 4.25 Serial Port Setup Picture 4.26 Tour Setup
[Serial port function]
Common serial port is used to debug and update program or set up specific serial port.
[Baud rate]
Choose the corresponding baud rate length.
[Data bit]
Include 5-8 options.
[Stop bit]
Include 2 options.
[Parity]
Include odd check, even check, sign check, blank check.
4.4.8 Tour setup
Set the tour display. Means that the tour mode is turned on. You can choose the single window, four windows, nine windows, si xteen windows tour
display or single display.
[Interval]
Set the tour switch interval. The set range is 5-120 seconds.
