Multi Flash Settings (Times & Frequency)
1. In the multi flash (TTL and M icon are not
displayed), long press the <MODE> Button to
enter multi flash setting submenu.
2. The two lines are separately displayed as T
(flash times) and H (flash frequency).
3. Short press the <GR> Button to choose the
related setting amounts. Turn the Select Dial
to change the blinking settings.
4. Continue to short press the <GR> Button, and the blinking settings on the next line can
be changed.
5. Until all the amounts are set. Short press the <MODE> Button to exit the setting status.
6. In the multi flash setting submenu, short press the <MODE> Button to return to main
menu.
Multi Flash Settings (Output Value)
1. In the multi flash (TTL and M icon are not
displayed), short press the <GR> Button to
set the current group.
2. In multi flash mode, the power output will be
changed from Min. to 1/4.
Setting the Transmitter
Note:
As flash times are restricted by flash output value and flash frequency, the flash times
cannot surpass the upper value that permitted by the system.
The times that transported to the receiver end are a real flash time, which is also related to the
camera's shutter setting.
- 35 -
- 36 -
CH
Setting the Transmitter
Group Settings
1. Long press the <GR> Button to set all effective groups simultaneously.
2. The settings of all effective groups will blink. Turn the Select Dial to change the
settings, until one of the group's setting turns to the maximum or the minimum and all
settings of the effective groups will not change now.
3. If the current group is in the M mode, the power output value is changeable from 1/1
full power to Min. power in 0.3 stop increments, until one of the group’s setting turns to
the maximum(1/1) or the minimum(Min.). If the current group is in the TTL mode, all
the other groups which are in the M mode will change their FEC amount
simultaneously. The FEC amount is changeable from -3 to 3 in 0.3 stop increments,
until one of the group’s setting turns to the maximum(3) or the minimum(-3). If the
current group is in the -- mode (flash off), the amounts will not change.
4. If the groups in the M mode or TTL mode work together, the first FEC amount which
up to the maximum or the minimum is considered as the limitation.
5. Short press the <GR> Button again to confirm the setting.
