Setting the Transmitter
Settings and Description
It is advisable to set the transmitter to single
contact mode when using it to trigger the flash
by PC cord or through camera’s single contact.
OFF
Changing with camera's zoom value.
Zoom
(
20/24/28/35/50/70/80/105/135/
200mm)
PC sync socket connects with camera as an input
PC sync socket connects with flash as an output
Second curtain sync off
Second curtain sync on
1/128
1/256
3 groups are displayed
5 groups are displayed
Turn off the beeper on the receive end
Turn on the beeper on the receive end
Setting Signs
on
--
AU
20,24,28,35,50,70,
80,105,135,200
In
ou
--
on
1/128
1/256
03
05
--
on
Functions
Single contact
mode
Zoom setting
PC sync socket
as an input/
output
Second curtain
sync [Note 2]
Minimum power
output value in
M/Multi mode
Displayed
groups
Beeper ON/OFF
Custom
Functions No.
C.Fn-01
C.Fn-02
C.Fn-03
C.Fn-04
C.Fn-05
C.Fn-06
C.Fn-07
Application
√
√
√
√
√
√
√
- 39 -
- 40 -
Setting the Transmitter
1. Press the <CH/OK> Button for 2 seconds or longer until <Fn> is displayed.
2. Select the custom function No.
* Turn the Select Dial to choose the Custom Function No.
3. Change the Setting.
* Press the <GR> Button until the custom function No. blinks.
* Turn the Select Dial to set the desired number. Pressing <GR> button will confirm the settings.
* Press <MODE> button to exit the C.Fn settings.
[Note 2]:
Second curtain sync cannot be set through the camera's external flash functions setting.
When using second curtain sync, the effective shutter speed range is from 1/30s to 30s. When shutter speed
is set as buLb or is quicker than 1/30s, the settings are invalid.
After being turned on, second curtain sync is effective even though HSS has been set and the shutter speed
range is from 30s to 1/30s.
After second curtain sync is turned on, synchronization delay settings are invalid.
√
√
Double-click the
CH
Button to turn on/off the modeling lamp of the receive end.
Press the
TEST
Button to turn on the flash trigger. When the Status Indicator Lamp blinks two
times, it means the effective remote distance is below 30 meters, thus the transmitter and receiver
can communicate normally no matter how near they are.
Settings and Description
Setting Signs
Functions
Custom
Functions No.
Application
Only send after the setting values have been
changed.
Forcibly send the setting values before firing
even though the values has not been changed.
--
on
S
end the setting
value forcibly
C.Fn-08
√
The transmitter is in the master mode, which
can set the receiver’s mode and output on the
transmitter end.
Open the APP mode and the transmitter
can
only trigger flashes. Only channel and custom
settings can be adjusted and the LCD panel
will display APP.
--
on
APP mode
C.Fn-09
√
