Optional Items (Sold Separately)
Power Supply
2 AA Batteries
There are two modes of power supply
Wireless Handheld Microphone
Transmitter WH-M1
Plug-On XLR Transmitter
TX3-XLR
Operation Instruction
Power/Mute Button
Transmitter Setting
TYPE-C Port(5V)
Power ON/OFF
: Long press this button for 2 seconds to
power on/off.
Mute Mode
: Short press this button to turn on/off mute
mode.
Menu Button
: Group/Channel/Power settings: long press
the menu button to enter the setting interface. Then short
press the menu button to switch the next setting.
Note:
When the group, channel and power are successfully set, short press
the menu button won't change, please long press to enter the setting interface
again.
Language Setting
: After the first power-on, the language selection is displayed,
English/Chinese, press + /- to select, and then press the Menu button to
confirm and exit.
Select English language, the operation is following:
Note:
After selecting the language, if you need to switch the language, you can reset it and
select again. Long press the + and - buttons at same time, this operation will reset the device.
Note:
When the group, channel and power are successfully set, short press the menu button
and there is figure blinking, please long press to enter the setting interface again.
Group Setting
: Select the GR (the letters under the GR
blinking), press +/- button to select the A/B group, after
selecting, short press the menu button to exit and switch
to the next setting.
Channel Setting
: Select the CH (the number under CH
blinking) press the +/- button to set the channel from 01
to 48, then press the menu button to exit and switch to
the next setting.
RF Power Setting
: Select the (the letter under
blinking ), press +/- to switch H(high) and
L(low), then short press the menu button to exit.
Display Brightness Setting
: short press +/- button until
OLED Light is displayed. Then, long press the menu
button until the figure under OLED Light is blinking, and
then short press +/- button to choose brightness from 1
to 8 levels.
Firmware Version
: short press +/- button until Version
is displayed, and this is the version of firmware.
Backlighting Time
: Short press +/- button until Screen
Dormancy is displayed. Then,long press the menu button
until the figures under th Screen Dormancy is blinking.
Short press the +/-button to choose backlighting time: ON
means with backlighting on, OFF means backlighting off,
10S/30S/60S means delay 10S/30S/60S.
Reset: short press the + and - button at same time for 3
seconds, then Reset... is displayed which means the
device is in the progress of reset. After reset, the device
back to language selection page and short press +/-
button to select, then press MENU button to return to
the main interface.
Signal
Signal
Signal
Signal
Version v.1.15
Signal
Signal
