OUTPUT: to connect with external audio
signal output.
PHONES: to connect with earphone cable.
Receiver Port
MIC: to connect with lavalier
microphone.
Transmitter Port
Receiver Setting
Operation
Power/Return Button
Power ON/OFF
: Long press this button for 2 seconds to
power on/off. Short press this button to back to main page.
Menu Button
: Group/Channel/Volume settings: long press
the menu button to enter the setting interface. Then short
press the menu button to switch the next setting.
Group A/B Settings
: Long press menu button, GRA
displayed, it is settings of group A.
Group A/B ON/OFF
: Select the GRA/GRB (the letters
under the GRA/B blinking), press +/- button to select the
ON/OFF, after selecting, short press the menu button to
exit and switch to the next setting.
Channel Setting
: Select the CH (the number under CH
blinking) press the +/- button to set the channel from 01 to
48, then press the menu button to exit and switch to the
next setting.
When setting the Group B Settings
: first short press
the to return main page and short press +/- button until
the GRB displayed, then long press menu button to enter
the settings of group B.
Note: Please set the receiver and transmitter to the same channel during usage, thus achieving
recording and real-time monitoring.
Language Setting:
After the first power-on, the language selection is
displayed, English/Chinese, press + /- to select, and then press the Menu
button to confirm and exit.
Select English language, the operation is following:
Note: After selecting the language, if you need to switch the language, you can reset it and
select again. Long press the + and - buttons at same time, this operation will reset the device.
Note: When the group, channel and power are successfully set,
short press the menu button and there is figure blinking, please long
press to enter the setting interface again.
Volume Setting
: Select the VOL (the number under VOL
blinking) press the +/- button to set the channel from 00
to 15, then press the menu button to exit and switch to
the next setting.
Mono/Stereo Output Selection
: short press +/- button until
Output Mode is displayed. Then, long press the menu button
until the Mono/Stereo under Output Mode Light is blinking,
and then short press+/- button to switch Mono and Stereo.
Display Brightness Setting
: short press +/- button until
OLED Light is displayed. Then, long press the menu button
until the figure under OLED Light is blinking, and then short
press +/- button to choose brightness from 1 to 8 levels.
Backlighting Time
: Short press +/- button until Screen
Dormancy is displayed. Then,long press the menu button
until the figures under th Screen Dormancy is blinking. Short
press the +/-button to choose backlighting time: ON means
with backlighting on, OFF means backlighting off,
10S/30S/60S means delay 10S/30S/60S.
Reset
: short press the + and - button at same time for 3
seconds, then Reset... is displayed which means the device
is in the progress of reset. After reset, the device back to
language selection page and short press +/- button to select,
then press MENU button to return to the main interface.
Firmware Version
: short press +/- button until Version is
displayed, and this is the version of firmware.
GRA
GRA
GRA
GRA
GRA
GRA
Version v.1.15
