Flash Video Light
Power Supply
Power
Color Temperature
100% Light Brightness(LUX,1M)
CRI ≈
TLCI ≈
Light Brightness Range
Operation Temperature
Power Output
Channel
Group
Dimension
(not included a standard reflector)
Net Weight
FV150
AC100V-240V (50/60Hz)
150W
5600±200K
≈12000
96
96
10%-100%
-10°C ~ 50°C
1/16-1/1 or 6.0-10.0
32
16(A, B, C, D, E, F, 0-9)
34x20x16cm
3.13Kg
FV200
200W
≈18000
36.7x20x16cm
3.33Kg
Technical Data
Remote Control
Power Supply
Wireless Frequency
Distance
(emptiness)
Channel
Group
Standby Time
Operation Temperature
Dimension
Net Weight
RC-A6
3.0V(AAA*2)(not include)
2.4GHz
50m
32
16 groups(A-F, 0-9)
Over one year
-10°C ~ 50°C
120*38*15mm
30g
FCC Warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
▪ Consult the dealer or an experienced radio/TV technician for help.
*RF warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
▪ Reorient or relocate the receiving antenna.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
▪ Increase the separation between the equipment and receiver.
▪ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- 15 -
- 16 -
