STE5 Operation Manual
5
1. Barcode Printer and RFID Tag Encoder
The main purpose of STE5 is encoding a series of label attributes into a RFID tag. It can also
print readable content on the Smart Label that contains the RFIF tag. However, it cannot perform
normal printing alone. Please note that the printing function is only available when doing RFID
encoding. The Smart Media Manger software is provided to control all of STE5 printing and
encoding functions.
1-1. Printer Accessories
After unpacking, please check the accessories that come with the package, and store
appropriately.
STE5
Power
cord
Switching
Power
USB
Cable
Label Roll Core
Label
Stop
Plate
Quick Start Guide
Product
CD
1-2. General Specifications
Model
STE5
Print Method
Thermal Transfer / Direct Thermal
Resolution
203 dpi (8 dot/mm)
Print Speed
4 IPS (100 mm/s)
Print Width
4.25” (108 mm)
Print Length
Min. 0.39” (10 mm); Max. 68” (1727 mm)
Memory
4MB Flash (2MB for user storage) ; 8MB SDRAM
Sensor Type
Adjustable reflective sensor. Fixed transmissive sensor, central aligned
Ribbon
Types: Wax, wax/resin, resin
Length: 981’ (300 m)
Width: 1.18” Min. - 4.33” (30 mm - 110 mm) Max.
Ribbon roll diameter: 2.67“ (68 mm)
Core diameter: 1” (25.4 mm)
RFID
HF RFID tag can support the transponder ICs which the radio frequency is on
13.56MHz and follows the ISO/IEC 15693 standard
Printer Language
EZPL
Software
Label design software: SMM (Smart Media Manager)
Resident Fonts
Bitmap fonts: 6, 8, 10, 12, 14, 18, 24, 30, 16X26 and OCR A & B
Bitmap fonts 90°, 180°, 270° rotatable, single characters 90°, 180°, 270°
rotatable
Bitmap fonts 8 times expandable in horizontal and vertical directions
Scalable fonts 90°, 180°, 270° rotatable
Содержание STE5
Страница 1: ...P N 920 013911 00 Rev D 03 2013 ...
Страница 35: ......