Godex Label Printer User Guide
Page 31
10.
Choose whether you want 6 lines per inch or 8 lines per inch. On a 4” high label this is the choice
between a total of 24 lines of larger text or 32 lines of smaller text.
11.
Choose the number of copies of identical labels that should print together. A one indicates that the
printer should print only one label and no duplicates.
12.
Set the Comments Word Wrap Multiplier. The number here is multiplied by the width of the label in
inches to determine the number of characters to print in a single line before wrapping to the next line
down. For example, the default of 15 for a 4” wide label would mean that 60 characters would print
before the line begins wrapping. If you have long comments that are truncated and not wrapping to
the next line properly, lower this number.
13.
Select your Heading and Footing preferences to determine what will print on the label. Bear in mind
that you have only as many lines as the height of the label and your choice of the number of lines per
inch will allow. The chart below will assist in determining the maximum print line number:
Label Height
6 lines/inch
8 lines/inch
2”
12
16
3”
18
24
4”
24
32
