Godex Label Printer User Guide
Page 39
21.
Change the Function Character to None.
22.
Click OK to close the Advanced Options and then click OK again to close the Printing Preferences.
23.
Click onto the Tools tab.
24.
On the Tools tab, click Action > Send Printer Command…
25.
Type the following text into the Printer Command box. The carat symbol is Shift+6. Press the Enter key
after the command in order to send a Carriage Return/Line Feed character at the end of the command.
^XSET,USBETHERNET,1
26.
Click Send. You should hear a faint click inside the printer, and the status light on the printer will blink
for a few seconds.
27.
Click Close.
28.
Follow the instructions in the section on Configuring the Printer Driver to Print over the Network.
