Godex EZ-2P, Руководство пользователя

Страница: 14 / 18

13
2-6. Self Test
The self-test function helps you check if the printer works well. To get in the self-test function;
please follow the steps.
1. Hold down the feed button when powering on.
2. Release the feed button after the printer beeps 4 times.
3. Wait about 3 seconds, the printer will print the following contents.
EZ-4TT LABEL PRINTER
VERSION : Vx.xx
CODE 39 EAN 8 EAN 13
CODE 93 UPC E UPC A
I 2/5 CODABAR CODE 128
MAXI CODE PDF417
Check mode
To get in the check mode; please go after the following steps.
1. Hold down the feed button when powering on.
2. Release the feed button after the printer beeps 5 times.
3. The printer will print the following contents.
CHECK MODE BEGIN
Note: Disable the Check mode or Self-test, please power off the printer at least 2
seconds, than power on again.