background image

 
 

Warranty Exclusions and Conditions 

Statement 

 

 
 
The warranties provided above are the only warranties applicable.  No other warranties, 
expressed or implied, are given.    Godex does not make any IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE in connection with its 
sale of products or services.    It is the desire of Godex to be responsive to specific needs 
and questions; Godex does not assume responsibility for any specific application to which 
any products are applied including, but not limited to, compatibility with other equipment.   
All statements, technical information or recommendations relating to Godex products are 
based upon tests believed to be reliable yet do not constitute a guaranty or warranty.   
 
The maximum liability for warranty claims is limited to the invoice price of the product 
claimed defective.    Godex does not assume responsibility for delays or replacement or 
repair of products.    Godex shall not under any circumstances be liable to any party for loss 
of profits, lost data, diminution of good will, or any other special or consequential damages 
with respect to any claim made under agreement with Godex.    Specifically for software, 
Godex is not liable for any incidental or consequential damages caused by abuse or 
misapplication of the software or by its use in violation of the international business law and 
treaty. 
 
No sales person, representative, or agent of Godex is authorized to make any guaranty, 
warranty, or representation that contradicts the foregoing.    Any waiver, alteration, addition 
or modification to the foregoing warranties must be in writing and signed by an executive 
officer of Godex to be valid. 
 

Содержание EZ-1100

































Отзывы: