Goddess Dubrovnik 2, Инструкция по эксплуатации

Страница: 34 / 44

ENG
ENG - 34
WARNINGS
Safety precautions
A) To avoid fire, do not dry clothes or leave any towels in the sauna.
B) To prevent burns or electric shocks, do not touch or use metal tools on the net cover
of the far infrared heater elements.
C) While in the sauna, do not touch the light bulb. If the bulb needs to be changed,
switch it off and wait until the sauna is shut off and the bulb is cool
D) Do not spray water on the far-infrared tube. This activity may result in electric shock
or damage to the heater elements.
E) Do not use the infrared sauna if you have any of the following conditions:
1) Open wounds
2) Eye diseases
3) Sever sunburns
4) Elderly & weak people, especially those suffering from a disease, pregnant women
and infants are prohibited. Children over the age of 6 years may use the sauna under
the supervision of adults.
5) If suffering from a disease directly related to temperature, seek the advice of a doctor
before using.
F) Do not place pets in the sauna.
G) Do not use the sauna if you are under the effects of alcohol.
H) Do not take wather or the liquids into the sauna room.
TROUBLE SHOOTING:
Problem Possible reason Countermeasure
Indicator light for power
supply not working
The connector is not connected
properly
Check the connector or replace
a new one
No power supply input
Check the circuitry (especially
weather there is power supply
input)
Indicator light is broken Replace the circuitry panel
Indicator light for function
is not working
The heating indicator light is
broken
Replace the relevant control panel
The circuit board
or components are broken
Replace the circuit board
The temperature sensor is
broken
Check the connect is loosen
and replace it
Infrared Heater
not heating up
The heater is broken
Replace with a new one
Of the same specifications
The wire junction
or the heater’s wire is loosen
Check and make them tight
The temperature sensor
is broken
Check junction of the temperature
sensor is loosen and replace it
The circuit board of the relay
is not work
Replace the circuit board