Goddess Dubrovnik 2, Инструкция по эксплуатации

Страница: 32 / 44

ENG
ENG - 32
14) Install the ionizer
1.Connect the power supply. See FIG-13B
2. Hang the ionizer on panel using the screws included. See FIG-13C
FIG-13A FIG-13B FIG-13C
15) Install the CD player
Depending on the CD player, you can find the marked transport screws on the top of the
player, which are necessary to by screwed out before the CD will star to work. All wiring
must be connected to the top panel. Plug pin connector into the socket on the back of the CD
player (you can pull it out by pressing the top of the connector) and then plug the antenna.
Installation procedure – see the following photos:
FIG-14A FIG-14B FIG-14C FIG-14D
FIG-14E FIG-14F FIG-14G FIG-14H
16) Making sure all steps are finished correctly, plug in the power and try using the sauna at first
to make sure it will work properly. Then put the external top board (section 10) over the internal
top board, and take out the power plug through the corresponding hole in the external top
board. See FIG-15
FIG-15
Slip the power plug
through external top board
FIG-16
Fix the external
board with screws
16) Take the screws affixed on the external top board, then set up the board using the cross
screwdriver. See FIG-16
Installation Completed.