4/13
Quick Start Guide
GB
ADDITIONAL INFORMATION
GOCLEVER Sp. z o. o. hereby declares
under our sole responsibility that the
product is in conformity with following
directives: RED (2014 / 53 /EU),
EMC (2014/53/EU), EMC (2014/30/EU). Full
document (declaration of conformity) is available
for download from www.goclever.com in product
page.
Correct Disposal Of This Product (Waste
Electrical & Electronic Equipment).
(Applicable in the European Union and
other European countries with separate
collection systems)
This marking indicates that at the end of
its working life this product should not be disposed
of with other household waste in the EU. To prevent
possible harm to the environment or human health
from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of
material resources.
Installing mobile app for smartphone
Use QR code on page (2) to install software for your
smartphone. You should search for NTK Cam mobile
app on Google Play or App Store.
Charging camera
: page (2). There is battery icon
on LCD (9&10) showing battery status.
Turning camera ON/OFF
Press button (1) for 3 seconds to turn camera ON
or OFF.
Memory cards for video recording
Device accepts micro-SD cards with rated speed of
10 or faster. In case camera detects memory card
which is too slow, it will restrict certain recording
modes (for example 4K).
Recording videos
Insert micro-SD card to slot (5). With camera
turned on, press once button (8) start recording.
Connecting camera with smartphone over Wi-
Fi
Insert micro-SD card to slot (5) and turn camera
ON. Press once button (2) to turn Wi-Fi module on.
Go to page number (3) in this manual to see how to
proceed with smartphone.
Camera modes
You can cycle through following modes by pressing
button
(1). 1: continuous video recording, 2: photo taking,
3:Slow motion, 4:video review, 5:settings. 4/16
Press button (1) four times and accept choice
by pressing (8) you can enter settings menu.
Short press button (3) to travel
downwards, to move up (2). Press button
(8) to enter/accept. Press button (1) to
get back/exit menu.
Menu items:
Video resolution:
choose between 4K,
2.7K, 1080 and 720 modes.
Looping video: splits video into 2,3 or 5
minutes segments.
Time stamp:
set it on if you need to
show date and time on videos and photos.
Exposure:
choose to make videos
brighter or darker manually.
Photo resolution: choose between 16
Mpx, 12 Mpx, 8Mpx, 5Mpx and 2 Mpx.
Burst photo:
enables shooting 3,5 or 10
photos in a row.
Time lapse:
set interval
after which camera
take a photo in agreed time and show as
a one movie.
Slow Motion
– video recording in slow
motion (1080p 60kl/sek lub 720p 120
kl/sek
Motion detection
– changes in motion
will be detected and camera start
recording
Language:
you can change
language of menu in camera.
Date and time:
set current time and
date.
Sound indicator:
set sound
notifications.
Upside down:
enables to rotate cameras
display 180 degrees.
Screen saver:
set after how much time
camera will turn off display to conserve
energy.
Power saver:
choose for how
long camera will operate without use.
Format:
you can format your micro-SD
card. It advisable to do it once for each
memory card before using camera for the
first time.
Reset:
you can reset all settings in
camera.
Version:
information about
firmware version.
1. POWER BUTTON/MODE
2. UP/WIFI
3. DOWN
4. LENSES
5. MICRO SD PORT
6. MICRO USB PORT
7. MICRO HDMI PORT
8. OK/RECORD/ENTER BUTTON
9. LCD
10. SMALL SCREEN (SHOW TIME, BATTERY LEVEL,
MODE, SD CARD..)
11. these 2 Leds confirm that camera is power on,
blue light is blinking when recording
12. Charging diodes
1
2
3
8
4
5
6
7
10
9
11
12
