Goboservice GOLED, Инструкция по эксплуатации, Страница: 9 / 17

GOLED
- 9 -
E
N
G
L
IS
H
LAMP GOBO LENS
Fig.4
Once the installation direction of the gobo is clear, remove the gobo holder (Fig.5); unscrew the metal
lock ring grasping it by the two lateral notches placed on the external side of it (Fig.6); insert the gobo
into its own housing, ensuring that it is properly positioned (Fig.7); then re-screw the metal lock ring to
the gobo holder and put this in the projector with the threaded ring nut facing the focusing lens.
Fig.5 Fig.6 Fig.7
WARNING: gobo mounting has to be done taking care that the gobo surface will be not touched, fouled
or stained in order to avoid scratches visible on projection; these scratches then, with the heat of
projector usage, can also cause the gobo breaking.
The gobo mounting/substitution must be done when the projector is switched off and not connected to
the mains supply. If the gobo must be substituted after the projector usage, wait (about 5 minutes) so
that all internal components of projector are cool.